Ordering Information - LEGRAND Wattstopper FSP-212 Instructions D'installation

• If lights still do not turn go to Dim Level, call 800.879.8585 for technical support.
Lights will not turn OFF:
• Make sure the FSP-212 is not set to Mode E (Service mode) and time delay trim is not at max position.
• To quickly test the unit operation, enable test mode and move out of the sensor's view. Lights should fade to the dim level after 5
seconds and then turn OFF after 2.5 seconds.
• False Triggering may occur if the sensor is exposed to high ambient temperature conditions, so ensure the installed location has
good ambient temperature.
• If lights still do not turn OFF, call 800.879.8585 for technical support.
Catalog #
FSP-212 Line Voltage 0-10V PIR Fixture Integrated Outdoor Sensor
FSP-L2 360° lens, up to 44' diameter at 8' height
FSP-L3 360° lens, up to 40' diameter at 20' height
FSP-L7 360° lens, up to 100' diameter at 40' height
FSP-C1 Small skirt, for use with FSP-L2 and FSP-L3 lenses
FSP-C2 Large skirt, for use with FSP-L7 lens
Sensor colors indicated by one of the following suffixes at the end of the catalog #:
-W = White; -B = Black; -BR = Bronze/Brown; -G = Grey/Silver
All manuals and user guides at all-guides.com

ORDERING INFORMATION

5
Description