LEGRAND Wattstopper FSP-202D Instructions D'installation

No: 27532 – 11/21 rev. 6
Catalog Number • Numéro de Catalogue • Número de Catálogo: FSP-202D
Country of Origin: Made in China • Pays d'origine: Fabriqué en Chine • País de origen: Hecho en China
The FSP-202D is a motion sensor that dims lighting from high to
low based on movement. This slim, low-profile sensor is designed
for installation inside the bottom of a light fixture with a 0–10V
output dimmable ballast or LED driver control.
The sensor uses passive infrared (PIR) sensing technology that reacts
to changes in infrared energy (moving body heat) within the coverage
area. Once the sensor stops detecting movement and the time delay
elapses lights will go from high to low mode and eventually to an OFF
position if it is desired. Sensors must directly "see" motion of a person
or moving object to detect them, so careful consideration must be
given to sensor luminaire placement and lens selection. Avoid placing
the sensor where obstructions may block the sensor's line of sight.
The FSP-202D has a photocell to read the light level and can
continuously raise or lower the dimming level of the lighting loads,
based on the ambient light and the desired light level setting.
The FSP-202D operates at 12
installed in indoor and outdoor environments, and provides easy to
use selectable modes with several adjustable parameters.
The FSP-202D offers four different control modes of operation,
(plus service and test modes) that can be selected using a rotary
trimpot. Once powered up, each mode has a factory default set of
parameters. Additionally, sensor adjustment is available for time
delay and high/low dim levels via rotary trimpots.
Several lenses are available for use with the FSP-202D. Lenses give coverage at mounting heights between 8' - 40' for applications
such as, offices, warehouses and outdoor use. Density and range of the coverage is determined by the type of lens and mounting
height. A lens with shroud option is also available. The shroud blocks light coming from the fixture, to prevent interference with the
photocell function of the sensor. Lens modules are IP66 rated when combined with an FSP-202D sensor mounted to an outdoor rated
fixture. See the FSP-Lx Coverage Guide for more information.
Wattstopper
Selectable Mode Continuous Dimming Low Voltage PIR Fixture Integrated Sensor
Détecteur pour intégration au luminaire à gradation continuelle er mode sélectionable
de basse tension
Sensor PIR de bajo Voltaje con atenuación continua para luminarias y Modo
Seleccionable
Installation Instructions • Instructions d'Installation • Instrucciones de Instalación
DESCRIPTION AND OPERATION
32 VDC. It is designed to be
–
®
Voltage .....................................................................12–32 VDC
Current Consumption ........................................10 mA maximum
Wiring ....................................................................... 22–18 AWG
Terminal Connections .......+VDC, COM, DIM+, DIM-, CTRL
Control Output .........................................100 mA maximum
Dimming Voltage ......................... Dim + (purple), Dim – (pink)
Operating Temperature ................-40°F (-40°C) to 158°F (70°C)
Tightening Nut Torque ..............................................25–30 in-lbs
Dimensions
Collar .................................................1.3" diameter (33mm)
Collar height ................................................0.64" (16.3mm)
Body ....... 2.5"L x 1.5"W x .83"H (63.3mm x 38mm x 21.1mm)
Weight ................................................................... 2.89 oz (82 g)
Enclosure ....................................................... IP66 (NEMA STD)
Coverage
FSP-L2 Lens @ 8' height ........................up to 44' diameter
FSP-L3 Lens @ 20' height ......................up to 40' diameter
FSP-L7 Lens @ 40' height ....................up to 100' diameter
Dimming/
Hold Off
Setpoint/
High Trim
Selection
PIR Sensor
Sensor Protection Cap
NOTE: Remove Cap before use
LENS OPTIONS
SPECIFICATIONS
Adjust
10V
C
B
D
Mode
A
E
Mode
Motion Indicator
Red LED
1V
Time
Delay
15M
30S 30M
Time
Light Sensor