Arium ® 61316 - Sartorius Stedim Biotech arium 61316 Mode D'emploi

Measurement Units
This feature allows you to select
how measurement units are dis-
played. You can choose between
MO + cm or μS/cm, to display
data, compensated to 25°C, and
temperature.
To set the measurement units:
Proceed as follows:
1. Press Menu to activate the Main
Menu.
MENU Maintenance
Setup
Info
2. Select <Setup> and press Enter to
confirm.
Setup Time/Date
Print Mode
Set Point
Meas.Unit
Tank
Language
Audio Alarm
3. Select <Measurement Units> and
press Enter to confirm.
The display will show the following:
Meas. Unit
M O
μS/cm comp.
4. Use the arrow keys to select the
desired option and press Enter to
confirm.
The system will then switch to
the previously activated operation
mode.
18
Set Point
The option <Set point> allows
the user to select an individually
defined product water quality in
μS/cm or MO + cm downstream
of the RO modules.
To change the set point:
1. Press Menu to activate the Main
Menu.
2. Select <Setup> and press Enter to
confirm.
3. Select <Set Point> and press Enter
to confirm. The display will show
the following:
4. Select current set point (between
x cm comp.
10–80 μS/cm or 0.013–0.1 MO +
cm) and use the arrow keys to
change the desired set point.
5. Press Enter to confirm the set
point.
The system will then switch to
the previously activated Operation
Mode
Note!
When the water quality drops up
(μS/cm) or down (MO + cm), the
defined set point in the display will
show the following alarm
message:
In this case please contact your
Sartorius Stedim Biotech Service.
MENU Maintenance
Setup
Info
Setup Time/Date
Print Mode
Set Point
Meas.Unit
Tank
Language
Audio Alarm
Set Point XX MOxcm comp.
or
XX μS/cm comp.
XX % Rejection Rate
Set Point Error RO
_ _ _ _ _ _ _ _ _ _ Tank Level
Time Date
Tank System
With this option you have to set
the installed tank system (open
gravity or pressurized tank) to the
arium ® 61316.
The factory setting is always one
pressure tank.
Proceed as follows:
1. Press Menu to activate the Main
Menu.
MENU Maintenance
Setup
Info
2. Select <Setup> and press Enter to
confirm.
Setup Time/Date
Print Mode
Set Point
Meas.Unit
Tank
Language
Audio Alarm
3. Use the arrow key to scroll down,
select <Tank> and press Enter to
confirm. The display will show the
following:
Tank
Pressure Tank
Open Tank*
* on request
4. Use the arrow keys to select the
desired tank system and press Enter
to confirm.
The system will then switch to
the previously activated operation
mode.