MC Crypt CMT-900C Notice D'emploi page 38

15. Troubleshooting
The CD is played with interruptions.
• The CD is dirty.
• The CD is scratched.
• The CD has a manufacturing flaw.
• During playback, the device is subjected to vibrations.
• Use a lower speed to burn your audio CD.
• If your CD-R cannot be played properly, use a different CD brand.
MP3 files cannot be played.
• Do not mix MP3 files on the CD with other files types (e.g. WMA files).
• Use a lower speed to burn your MP3 CD.
• Use universal file standard ISO 9660 to burn your CDs.
The PITCH slide control (23) does not function.
• The PITCH function is deactivated.
The track buttons (9 and 10) do not function.
• The FOLDER function is activated.
No sound audible.
• A device in the playback chain is not turned on.
• The wrong input was selected on the amplifier/mixing desk.
• The volume control of the amplifier/mixing desk or the power amplifier is turned to MINIMUM.
A channel does not work.
• An RCA cable has come off from the audio output of the CD player or the amplifier/mixing desk input.
• The balance control was set wrongly on the amplifier/mixing desk.
• The RCA connection cable is defective.
ID3 text is not displayed.
• The MP3 files on the data source (CD, USB memory, SD card) do not contain any ID3 text data.
• There are no MP3 files on the source device.
Repairs other than those described above should only be carried out by an authorised spe-
cialist.
38
All manuals and user guides at all-guides.com