Selecting The Playback Source; Play/Pause; Track Selection; Selecting A Folder For Mp3 Playback - MC Crypt CMT-900C Notice D'emploi

10. Using the device
e) Selecting the playback source
• Use the CD/USB/SD button (21) to select the playback source. The LC display shows CD, USB, or CARD.
f) Play/pause
• Press the PLAY/PAUSE
• The time on the display starts running. The starting position of the track is automatically saved as a CUE
point.
You can stop playback in two ways:
• Press the PLAY/PAUSE
• During playback, press the CUE button (12). The device returns to the CUE point and pauses.
g) Track selection
Use track buttons
• Press the "next track"
• Press the "previous track"
The selected track is played in the mode (PLAY or PAUSE) the CD player was in before the track
button was pressed. Whenever a track is selected, the device automatically sets the CUE point at
the beginning of that track.
h) Selecting a folder for MP3 playback
Use track buttons
Of course, this feature is only available providing the corresponding information is saved on the MP3 medium.
• Press the "TRACK/FOLDER" button (11). The button lights up.
• Press the "next track"
• Press the "previous track"
The selected track is played in the mode (PLAY or PAUSE) the CD player was in before the track
button was pressed. Whenever a track is selected, the device automatically sets the CUE point at
the beginning of that track.
i) Search function
There are two different search modes to find a specific position within a track.
Use the track buttons
• Hold down the "next track" button
32
All manuals and user guides at all-guides.com
button (13) to start playback.
button (13). The device pauses and remains at the last position.
(9 and 10) to select the individual tracks of a CD, a USB stick or an SD card.
button (10), to jump to the next track.
button (9), to jump to the previous track.
(9 and 10) to select the individual MP3 folders on a CD, a USB stick or an SD card.
button (10), to jump to the next folder.
button (9), to jump to the previous folder.
(9 and 10) to start the quick search function.
(10) for a quick forward search.