Connections And Control Elements - MC Crypt CMT-900C Notice D'emploi

6. Connections and control elements

(see fold-out page)
(1) Mains power switch
To turn the CD player on or off.
ON position > the device is switched on; OFF position > the device is switched off.
(2) JOG wheel
Turn the wheel to search within a song or alter playback speed.
(3) REVERSE button
When the REVERSE function is activated, songs are played backwards.
(4) BRAKE button
The BRAKE function causes the song to slowly start or slow down when the PLAY/PAUSE button (13) is
pressed. This function simulates a record played on a record player.
(5) TIME button
This button switches between the display options for the playing time:
elapsed track time > total remaining time > remaining track time
(6) A button
The device allows you to save a "seamless" play loop. For this purpose, the device features buttons A (6),
B (7) and RELOOP (8).
Use the A button to program the starting point of the play loop.
(7) B button
Use the B button to program the end point of the play loop or quit the play loop by pressing it once again.
(8) RELOOP button
Use this button to play the saved play loop.
(9) "Previous track" button
Use the track buttons to select the desired track/folder on the selected storage device. Hold down the but-
ton to start the quick search function.
(10) "Next track" button
Use the track buttons to select the desired track/folder on the selected storage device. Hold down the but-
ton to start the quick search function.
(11) TRACK/FOLDER button
This button modifies the function of the two track buttons (9 and 10). Select between skipping tracks (Track)
and skipping folders (Folder).
(12) CUE button
Press this button to jump to the CUE point.
(13) PLAY/PAUSE button
Use this button to start or temporarily stop (pause) playback. During playback, the button is lit, during pause,
it flashes.
(14) PITCH BEND + button
This button allows you to temporarily increase the playback speed of the CD player by 16 %.
All manuals and user guides at all-guides.com
27