Selection & Operation Of The Modes; Switching Between Operating Modes - SC iStick Tria Manuel De L'utilisateur

All manuals and user guides at all-guides.com
69
SC iStick Tria – Selection & Operation of the Modes

Switching between operating modes

Press the Fire button three times quickly to enter the menu and see your current vaping mode� Press the Setting
buttons to switch between the VW, USB (if the USB function is activated), TC-Ni, TC-Ti, TC-SS316, and TCR (M1, M2, M3)
functions� Press the Fire button once or simply wait 10 seconds to confirm your current selection and exit the menu�
Settings in VW Mode
Depending on the head used, the power can range between 1 watt and 300 watts in VW mode� Use the Up and
Down button to increase or decrease the power�
Settings in TC Mode
1� In TC mode, you can adjust the power output between 1 W and 300 W by pressing the Setting buttons�
2� To do this, press the Fire button 4 times in a row to adjust the wattage�
3� Use the Setting buttons to set the preferred watt value that determines a particular temperature�