Selection & Operating Of The Modes - SC iKonn 220 Mode D'emploi

55
SC iKonn 220 - Selection & Operating of the Modes
Switching between Operating Modes
Press the Fire button three times quickly to enter the menu and see your current vaping mode� Press the setting
buttons to switch between VW, USB (if the USB function is activated), TC-Ni, TC-Ti, TC-SS316, and TCR (M1, M2, M3)
modes� Press the Fire button once or simply wait 10 seconds to confirm your current selection and exit the menu�
Settings in VW Mode
In VW mode, the power – depending on the atomizer head used – can be between 1 and 220 watts� Use the Up and
Down button to increase or decrease the power; the adjustment will go more quickly if you press and hold the buttons�
Settings in TC Mode
1� In TC mode, you can adjust the wattage between 1 W and 220 W by pressing the setting buttons�
2� Confirm your selection by pressing the Fire button�
3� Use the setting button to select the preferred temperature�