SC iStick Tria Manuel De L'utilisateur page 73

SC iStick Tria – Selection & Operation of the Modes
Locking and unlocking the atomizer resistor in TC/TCR mode
Press the Fire button and the Up button simultaneously for a few seconds while the device is switched off to lock or
unlock the base resistance� The "Lock" sign appears on the display� The „Ω" symbol will reappear once the vaporizer
is unlocked�
Note
1� Please use this lock function only at room temperature so that the correct base resistance can be displayed in
lock mode� If this is not the case, faulty measuring results can occur which can also adversely affect the protecti-
ve functions�
2� A new head is identified in TC mode (temperature control)� The confirmation inquiry "NEW COIL RIGHT, SAME
COIL LEFT" will appear on the display� Press the right Setting button if you are using a new head, or the left
Setting button if you would like to continue vaping with the previously used head�
3� If you inadvertently attempt to use conventional coils that are not suitable for temperature-controlled vaping or
whose resistance is greater than 1�5 ohms in TC or TCR mode, the device will automatically switch to VW mode�
All manuals and user guides at all-guides.com
71