Reely Sturdy Notice D'emploi page 40

• With the trim regulator (E) the steering limit can be set. This means, the turning circle can be made
smaller or bigger. For slow driving small turning circles are useful, for fast driving the opposite
setting enables a more sensitive steering.
• The lever (K) is for forward or reverse drive. If the lever is pulled in the direction of the handle with
the index finger (only pull carefully for first road trials!) the vehicle has to drive forward. If the lever
is pushed in the other direction the vehicle will reverse.
If necessary the setting of the servo-reverse switch (F) is to be corrected.
When changing between going forward and reverse, the lever has to be briefly (approx. 1 second)
in the centre position (centre position = motor not moving).
When the lever is directly pushed from forward to reverse, the brake function of the drive takes
place (vehicle will NOT go reverse).
Examples:
1. Release lever, vehicle is rolling to a halt (or doesn't move).
2. Going forward
3. Going forward and then braking (vehicle decelerated; does not roll slowly to a halt)
4. Going forward and then going reverse (wait briefly between change!)
40
Wait briefly