Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Various
AUTOTEST
--------
Telephone notifications associated with the system's autotest for
notification that system is "up and running"
Example:
means that telephones 3 and 5 are
--#-#---
enabled and the others aren't.
With number keys
select the phones to associate with the
(1)
(8)
notification
ARMING FAILED
--------
Telephone notifications associated with system activation in the
event of open inputs If an arming operation is activated and is not
completed within 5 mins (for example because there are open in-
puts), the telephone notifications set are carried out
With number keys
select the phones to associate with the
(1)
(8)
notification
Associating outputs
Associating the same output to several events or several areas (fail-
ures, alarms, etc ) gives the output the OR function
Example: if the general alarm of all the areas status is
associated with the same stable output, the output will
be activated when at least one area is in alarm mode.
The valid procedure for associating outputs with alarms or other
events, after accessing the Installer/Technical Menu, is as follows:
and with
ASSOCIATING 15 OUTPUTS
(▲)/(▼)
(*)
the options and press
The display illustrated always shows the
(*)
default value of the property With
Area general alarm output
AREA
OUTPUTS
AREA
AREA GEN. ALR.
(▲)/(▼)
Lets you select the output to associate with the single area's gen-
eral alarm
Area sabotage alarm output
AREA
OUTPUTS
AREA
(▲)/(▼)
AREA SABOTAG.
Lets you select the output to associate with the single area's sabo-
tage alarm (tamper inputs and 24-hour inputs)
Area technical alarm output
AREA
OUTPUTS
AREA
AREA
(▲)/(▼)
OUTPUT 004
Lets you select the output to associate with the single area's tech-
nical alarm (technical inputs)
(+)/(-)
NOTIF.
(1)....(8)
(+)/(-)
(1)....(8)
you can browse through
(▲)/(▼)
you can exit at any time
(#)
01
(*)
001
01
NO
(+)/(-)
01
(*)
001
01
NO
(+)/(-)
01
(*)
001
TECH ALR
01
(+)/(-)
Area burglary alarm output
AREA
OUTPUTS
AREA
AREA BURG ALR 01
(▲)/(▼)
For selecting the output to associate with the single area's burglary
alarm (burglary inputs)
Area ready output
AREA
OUTPUTS
AREA
AREA
(▲)/(▼)
Lets you select the output to associate with the ready status of the
single area (an area is ready when it has no associated input open)
Area general alarm output
AREA
OUTPUTS
AREA
(▲)/(▼)
AREA
OUTPUT 002
Lets you select the output to associate with the single area's on/
off status
Area buzzer output
AREA
OUTPUTS
AREA
BUZZ OUTPUT AREA 01
(▲)/(▼)
Lets you select the output to associate with the single area's "buzz-
er input" status (the buzzer function can be associated with an in-
put)
Area TC output
AREA
OUTPUTS
AREA
AREA TC OUTPUT 01
(▲)/(▼)
OUTPUT 001
Lets you select the output to associate with the single area's TC
status
The TC (Test Control) output is an output to block sensors with the
system disarmed, which behaves depending on the status of the
area:
•
with area off it deactivates the sensors' microwave;
•
with area on and during exit time it activates the sensors
System failure output
SYSTEM FAILURE
OUTPUT 003
Lets you select the output to associate with the system failure sta-
tus (general notification of failure)
01
(*)
001
NO
(+)/(-)
01
(*)
001
READY
01
NO
(+)/(-)
01
(*)
001
ON
01
(+)/(-)
01
(*)
001
NO
(+)/(-)
01
(*)
001
(+)/(-)
(+)/(-)
Publicité
Table des Matières
