Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Input modules
The valid procedure for all programming of input modules, after
accessing the Installer/Technical menu, is as follows:
(▲)/(▼)
INPUT MODULES 07
(*)
MODIFY IN.MOD. 01 LOC.MOD.8IN
choose the input module to be programmed and then press
nally browse through the options with
always shows the default value of the property With
at any time
Description of input modules
MODIFY IN. MOD. 01
LOC.
MOD.
8IN
DESCRIPTION
LOC.
MOD. 8IN
Lets you edit the description of the input modules
Module 1 is the control unit's local one, modules 2 upwards are
input expansion modules on the bus
Output modules
The valid procedure for all programming of output modules, after
accessing the Installer/Technical menu, is as follows:
OUTPUT MODULES 08
MODIFY OUT.MOD. 01 REM.MOD.8OUT
(▲)/(▼)
(*)
you choose the output module to be programmed and then press
; finally browse through the options with
(*)
trated always shows the default value of the property With
can exit at any time
Description of output modules
MODIFY OUT. MOD. 01
REM. MOD. 8OUT 01
DESCRIPTION
REM. MOD. 8OUT 01
Lets you edit the description of the output modules
Module 1 is the control unit's local one, modules 2 upwards are
input expansion modules on the bus
Radio modules
The valid procedure for all programming of radio modules, after
accessing the Installer/Technical menu, is as follows:
and with
RADIO 09 MODULES
(▲)/(▼)
(*)
the options The display illustrated always shows the default value
of the property With
you can exit at any time
(#)
Module description
MODIFY RAD. MOD. 02
MODIFY REM. CTRL 02
DESCRIPTION
MODIFY REM. CTRL 02
Allows editing of the description of the module
With the
keys you can move horizontally, with the alphanumer-
(+)/(-)
ic keys you can edit the description letter by letter
; with
you
(▲)/(▼)
; fi-
(*)
The display illustrated
(▲)/(▼)
you can exit
(#)
(*)
01
00
01
(*)/(#)
; with
(▲)/(▼)
The display illus-
(▲)/(▼)
you
(#)
(*)
00
(*)/(#)
you can browse through
(▲)/(▼)
(*)
00
(*)/(#)
Jamming
MODIFY RAD. MOD. 02
MOD. REM. CTRL 02
DESCRIPTION
MOD. REM. CTRL 02
By activating the JAMMING anti-screen function, in the event of
systemic or permanent disturbance of the transmission, the control
unit will trigger a 24 hour alarm
Inputs
The valid procedure for all programming of inputs, after accessing
the Installer/Technical menu, is as follows:
INPUTS 10
MODIFY INPUT 001 INPUT 001
(▲)/(▼)
(*)
put to be programmed (hereafter input
choose the property to be programmed Selecting the value
(▲)/(▼)
is done with the
keys The display illustrated always shows
(+)/(‒)
the default value of the property With
Status
STATUS
EXCLUDED
An input is excluded when it is not used
EXCLUDED
An input is armed when it is used in the system
ARMED
Inputs are in test mode when you monitor an input's perfor-
TEST
mance via the Events memory, without generating any siren alarm,
but instead by sending telephone alerts, if these are set up so
Example: after installing a system you detect that an
input keeps triggering an alarm for no apparent rea-
son. Testing said input lets you monitor for any po-
tential causes of alarms - via the Events memory and
without activating the siren.
Type
TYPE
IMMEDIATE
To change the operating characteristics of an input
This is the classic security-alarm input, active when the
IMMEDIATE
control unit is armed and inactive when it is disarmed If unbal-
anced it triggers a general alarm and the relative telephone calls
if they are set
Example: input of a magnetic contact on a window.
It is active only when the control unit is armed If unbal-
DELAYED 1
anced, it sets off entrance time 1, during which a valid code must
be entered to disarm the control unit During this time the buzzer
will make a continuous sound If the control unit is not disarmed
the general alarm will be triggered and the relative telephone calls
made if they are set
Example: input associated to an entry point.
Like DELAYED 1, but with entrance time 2
DELAYED 2
Immediate input active both when the control unit is armed
24 HRS.
and when it is disarmed The unbalancing of a 24-hour input trig-
gers a general alarm and the relative telephone calls if they are set
Example: input associated with the external siren tam-
per.
Immediate input active both when the control unit is armed
TECHNIC.
and when it is disarmed The unbalancing of a technical input ac-
tivates the output defined for the TECHNICAL ALARM, triggering a
continuous sound from the buzzer (for the duration of the technical
(*)
00
(+)/(-)
; with
choose the in-
(▲)/(▼)
) and press
; finally with
001
(*)
you can exit at any time
(#)
001
(+)/(‒)
001
(+)/(‒)
Publicité
Table des Matières
