CAME PXC99W Manuel De Programmation page 58

Areas associated with the key
KEY
KEY
ASSOC.
(▲)/(▼)
###-----
Lets you assign the areas of competence of the key
Use the number keys to set the areas to be associated
Key recognition
KEY
KEY
(▲)/(▼) LEARN
*=OK #=ESC
Lets a key be recognised and associated
Key authorisation
KEY
KEY
(▲)/(▼) AUTHORIZAT.
ARMING + DISARM.
The key is activated to arm and disarm the areas
ARMING + DISARM.
associated with it
The key is only authorised to arm the areas associated
ARMING ONLY
with it
Example: used when you wish to assign an arming
only key to the cleaning firm.
The key is authorised to temporarily inhibit the areas as-
ROUNDS
sociated with it
Associating output
KEY
KEY
ASSOC.
(▲)/(▼)
Lets you associate a pulse-type output with the entering of a key
on a reader
Example: used to open a lock via a key.
Group
KEY
KEY
(▲)/(▼) GROUP
Lets you associate a number of keys with a group
Example: key entered in group
menu which, if set as
PROGRAMMER
these keys be blocked for any type of operation.
Key description
KEY
KEY
(▲)/(▼) KEY
DESCRIPTION
Lets you edit the description of the key
With the keys you can move horizontally, with the alphanumer-
(+)/(-)
ic keys you can edit the description letter by letter
001
(*)
001
AREAS 001
(1)/(9)
001
(*)
001
KEY 001
(*)/(#)
001
(*)
001
001
(+)/(-)
001
(*)
001
OUTPUT 001
NO (+)/(-)
001
(*)
001
001
00
(+)/(-)
of the
ADDRESS
, will let
OPERAT: G. KEYS
001
(*)
001
001
001 (+)/(-)
Remote controls
The valid procedure for managing remote controls, after accessing
the Installer/Technical menu, is as follows:
and with
(▲)/(▼) REMOTE CONTROLS 18 (*)
trol to modify and press The display illustrated always shows the
(*)
default value of the property With
Remote control activation
REMOTE CONTROL 01
REMOTE CONTROL 001
(▲)/(▼) STATUS
DISABLED
If you wish to use a remote control, it needs to be activated
Areas associated with the remote control
REMOTE CONTROL 01
REMOTE CONTROL 001
(▲)/(▼) ASSOC.
###-----
Allows the areas of competence of the remote control to be as-
signed
Use the number keys to set the areas to be associated
Remote control recognition
REMOTE CONTROL 01
REMOTE CONTROL 001
(▲)/(▼) LEARN
*=OK #=ESC
Lets a remote control be recognised and associated
Scenarios
REMOTE CONTROL 01
REMOTE CONTROL 001
SCENARIO
(▲)/(▼)
*=MODIFY LIST
SCENARIO
GOING OUT
Associates scenarios with remote control keys
With choose the key (A, B, C, 4 16) and with
(▲)/(▼)
nario to be associated with it
By default the associations are:
Key A =
SCENARIO A GOING OUT
Key B =
SCENARIO B GOING TO BED
Key C =
SCENARIO C STAYING INDOORS
Key 4 =
SCENARIO 4 SCENARIO 004
Key 16 (0+6) =
SCENARIO 16 SCENARIO 016
Remote control description
REMOTE CONTROL 01
REMOTE CONTROL 001
(▲)/(▼) REMOTE CONTROL 001
DESCRIPTION
Lets you edit the description of the remote control
With the keys you can move horizontally, with the alphanumer-
(+)/(-)
ic keys you can edit the description letter by letter
select the remote con-
(▲)/(▼)
you can exit at any time
(#)
(*)
001
(+)/(-)
(*)
AREAS 001
(1)/(9)
(*)
001
(*)/(#)
(*)
01
(*)
(▲)/(▼)
A
(+)/(-)
the sce-
(+)/(-)
(*)
001
(+)/(-)