Connecting Your Component With No Hdmi Terminal - Pioneer HTP-710 Mode D'emploi

Connecting up

Connecting your component with no HDMI terminal

This diagram shows connections of a TV and DVD player (or other playback component) with no
HDMI terminal to the system.
COAXIAL
1
1 Connect the composite video output on
your DVD player to the VIDEO BD/DVD input
on this system.
Use a standard RCA video cable.
2 Connect the audio output on your DVD
player to the AUDIO BD/DVD IN inputs on this
system.
Use a stereo RCA phono cable. If your component
has a digital output, you can also use an optical
cable or coaxial cable for the connection.
Note
1 In this case, you'll need to tell the system which digital input you connected the component to (see Choosing the input
signal on page 54).
All manuals and user guides at all-guides.com
DVD player, etc.
Select one
AUDIO OUT
DIGITAL OUT
ANALOG
OPTICAL R L
2
1 2
1
VIDEO OUT VIDEO IN
1 3
3 Connect the MONITOR OUT on this system
to the composite video input on your TV.
Use the supplied video cable.
02
TV
37
En