Playing A Usb Device; Basic Playback Controls - Pioneer HTP-710 Mode D'emploi

05 iPod/USB playback

Playing a USB device

It is possible to listen to two-channel audio
using the USB interface on the front of this
system.
Important
• When connected to a television using
HDMI output alone, the USB playback
window of the on-screen display (OSD) will
not be displayed. In this case, use
composite connection instead.
1 Switch on the system and your TV.
2 Press iPod USB on the remote control to
switch the system to the iPod/USB.
No Device appears in the OSD.
3 Connect your USB device.
See Connecting a USB device on page 42.
Loading appears in the OSD as this system
starts recognizing the USB device connected.
After the recognition, a playback screen
appears in the OSD and playback starts
3
automatically.
USB PLAY
MP3 R:Fld S:On
R e l a x Yo u r B o d y
K e v i n J a c k s o n
W e a r e a l l o n e
32kbps
Note
1 This includes playback of WMA/MP3/MPEG-4 AAC files (except files with copy-protection or restricted playback).
2 • Make sure the system is in standby when disconnecting the USB device.
• Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and
digital audio players (MP3 players) of format FAT16/32. It is not possible to connect this system to a personal computer
for USB playback.
• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and
assumes no responsibility for any loss of data that may occur when connected to this system.
• With large amounts of data, it may take longer for the system to read the contents of a USB device.
3 • If the file selected cannot be played back, this system automatically skips to the next file playable.
• When the file currently being played back has no title assigned to it, the file name is displayed in the OSD instead;
when neither the album name nor the artist name is present, the row is displayed as a blank space.
• Note that non-roman characters in the playlist are displayed as
58
En
All manuals and user guides at all-guides.com
2
File/Folder number
File format
001/004
Repeat or Shuffle
Song name
Artist name
Album name
Elapsed time
0:01
Return
Bit rates

Basic playback controls

The following table shows the basic controls on
1
the remote for USB playback. Press iPod USB
to switch the remote control to the iPod USB
operation mode.
Button What it does
Starts normal playback.

Pauses/unpauses playback.

Press to skip to previous/next track.
/
Press and hold during playback to
/
start scanning.
Press repeatedly to switch between
Repeat Folder, Repeat One and
Repeat All.
Press repeatedly to switch between
Shuffle On and Shuffle Off.
Press repeatedly to change the
DISPLAY
song playback information
displayed in the front panel display.
/
During playback, press to skip to
/
previous/next track.
Press to return to the menu screen.
TOP
MENU
Press to return to the previous level.
RETURN
.