Pioneer HTP-710 Mode D'emploi page 20

01 Speaker Setup (HTP-610)
Chapter 1-2
Speaker Setup (HTP-610)
Safety precautions when
setting up
When assembling the speakers, lay them down
flat on their side to avoid accidents or injury.
Make sure to use a stable surface when
assembling, setting up, and placing the
speakers.
If the speakers are to be used in a stacked
configuration, always use the provided
brackets to secure them together (page 21).
Home theater sound setup
This is a standard multichannel surround
sound speaker setup for optimal 5.1 channel
home theater sound. The front left and right
speakers should be about 1.8 m to 2.7 m apart.
Center
Front left
Listening position
Surround left
*When center speakers are placed in the center.
Front left
20
En
All manuals and user guides at all-guides.com
Center
Front right
Subwoofer
Surround right
Front right
Center
Preparing the speakers
1 Attach the non-skid pads to the base of
each speakers and the receiver subwoofer.
For front, center and surround speakers:
Use the supplied adhesive to attach three pads
to the base (bottom) of each speaker.
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
Small non-skid pads
Large non-skid pads