Pioneer HTP-710 Mode D'emploi page 31

Speaker Setup (HTP-SB510)
Additional notes on speaker
placement
• Install the speaker below the TV, in the
center position.
• Televisions supporting 3D display transmit
signals to the 3D glasses worn by the
viewer. In order to view 3D images, consult
the television's Operating Instructions and
install the speaker so that it does not block
the television's 3D signal transmitter.
Precautions:
• Do not rest the speaker on the TV itself.
• Make sure that all the bare speaker wire is
twisted together and inserted fully into the
speaker terminal. If any of the bare speaker
wire touches the back panel it may cause
the power to cut off as a safety measure.
• The speaker and subwoofer are not
magnetically shielded and so should not be
placed near a TV or monitor. Magnetic
storage media (such as floppy discs and
tape or video cassettes) should also not be
kept close to the speaker and subwoofer.
• Do not attach the subwoofer to a wall or
ceiling. They may fall off and cause injury.
All manuals and user guides at all-guides.com
For Enhanced Sound Quality
A home theater system can be easily
constructed using just the speaker and the
subwoofer of this set, but by adding optional S-
SB5R speaker systems, you can enjoy genuine
5.1 channel surround sound.
Take the following points into account when
connecting the optional speaker systems:
• When the contents of these Operating
Instructions from chapter 2 on describe a
specific model, use those portions dealing
with the HTP-610.
• For information regarding the installation
and connection of optional speaker
systems, consult the information provided
with the optional speaker systems,
together Speaker Setup (HTP-610) on
page 20 portion of these Operating
Instructions.
• See Automatically setting up for surround
sound (MCACC) on page 51 to set up your
system again using MCACC.
01
31
En