Connecting Other Audio Components - Pioneer HTP-710 Mode D'emploi

02 Connecting up

Connecting other audio components

The number and kind of connections depends on the kind of component you're connecting.
Follow the steps below to connect a CD-R, MD, DAT, tape recorder or other audio component.
1 Connect the analog audio outputs of the
component to a set of spare audio inputs on
this system.
Use a stereo RCA phono cable. If your
component has a digital output, connect this
to a digital input on the system as shown.
Note
1 Note that you must connect digital components to analog audio jacks if you want to record to/from digital compo-
nents (like an MD) to/from analog components.
40
En
All manuals and user guides at all-guides.com
1 2
1
1
ANALOG
COAXIAL OPTICAL R
DIGITAL OUT AUDIO OUT
Select one
CD-R, MD, DAT, etc.
2
ANALOG
R L
L
AUDIO IN
2 If you're connecting a recorder, connect
the analog audio outputs to the analog audio
inputs on the recorder.
The example shows an analog connection to
the AUX OUT analog output jack using a
stereo RCA phono cable.
1