Pioneer HTP-710 Mode D'emploi page 38

02 Connecting up
Connecting an HDD/DVD recorder, VCR and other video sources
This system has audio/video inputs and outputs suitable for connecting analog or digital video
recorders, including VCRs and HDD/DVD recorders.
OPTICAL COAXIAL
DIGITAL OUT
Select one
1 Connect the composite video output on
your video component to the VIDEO DVR/VCR
input on this system.
Use a standard RCA video cable.
• If the video component connected is
equipped with an HDMI output, an HDMI
cable may also be used for connection. In
this case, use an HDMI cable to connect
the TV as well.
2 Connect the VIDEO DVR/VCR OUT on this
system to the composite video input on your
video component.
Note
1 In this case, you'll need to tell the system which digital input you connected the component to (see Choosing the input
signal on page 54).
38
En
All manuals and user guides at all-guides.com
1 2
1
3 4
ANALOG ANALOG
R L R L
AUDIO OUT AUDIO IN
DVR, VCR, LD player, etc.
2
VIDEO IN
3 Connect the audio output on your video
component to the AUDIO DVR/VCR IN inputs
on this system.
Use a stereo RCA phono cable. If your
component has a digital output, you can also
use an optical cable or coaxial cable for the
1
connection.
4 Connect a video inputs on the recorder to
the VIDEO DVR/VCR output on this system.
Use a standard RCA video cable.
1
HDMI OUT
VIDEO OUT
Select one