JAC TRADILEVAIN TL40 Mode D'emploi page 11

-
When you extract product:
D. Press the "-" key.
E. Enter your quantity to be extracted.
F. Press the "Enter" key to confirm.
c. Weighing (Optional) (fig.15)
A. Information on the weight remaining in the tank.
B. Press the "tare" key.
C. Information on the weight added or extracted since the last tare.
d. Feed (fig.16)
A. Pour the flour then hot water (45° Celsius – 113° Fahrenheit) into the tank.
B. Press the "cycle start" key.
C. Confirm cycle start.
D. Scrape down when the logo is displayed.
E. Close the cover, the cycle continues automatically.
7.4 Cleaning
a. Cleaning the screen (fig.17)
A. Press the "clean" key.
B. Select the screen inactive time.
C. Clean the screen during the countdown.
b. Cleaning the tank (fig.18)
A. Stop the cycle in progress.
B. Confirm cycle stop.
C. Empty your starter.
D. Pour very hot water into the tank (at least 60° Celsius – 140° Fahrenheit)
E. Press the clean logo.
F. Select the tank cleaning cycle duration.
G. Wait for the end of the cycle and drain/rinse the tank.
11