Routine Maintenance; Inspecting The Cables; Extraordinary Maintenance; Fuses Replacement - Videotec MAXIMUS MMX Manuel D'instructions

9 Maintenance
Before carrying out any type of
intervention, read the "Safety rules"
chapter of this manual.

9.1 Routine maintenance

When contacting VIDEOTEC for assistance please
provide the serial number and the identification
code of the model.

9.1.1 Inspecting the cables

The cables should not show signs of damage or
wear, which could generate hazardous situations. In
this cases, cable maintenance must be carried out.
MNVCMMX_2223_EN

9.2 Extraordinary maintenance

9.2.1 Fuses replacement

CAUTION! To ensure protection against the
risk of fire, replace the fuse with one the
same type and value. The fuse must only
be replaced by qualified staff.
To maintain cULus Listed certification, the
fuse must be UL Listed (OMEGA GT520222,
BUSSMAN S507).
The used fuse is described below.
FUSE REPLACEMENT
Supply voltage
24Vac, 50/60Hz
24Vdc
Tab. 10
As an alternative, use an fuse featuring the same
characteristics.
F1
Fig. 26
Fuse (F1)
T 2A H 250V 5x20
23