Configuring The Host System (Master) - Lenze CANopen PT E82ZAFUC010 Instructions De Montage

7 Commissioning

Configuring the host system (master)

Configuring the host system (master)
For communication with the function module, first the master system has to be configured.
Settings on the CANopen master
For configuring the CAN bus, the device description file (EDS file) of the communication
module has to be imported in the configuring software of the CANopen master.
The EDS file can be downloaded in the download area at http://www.Lenze.com.
68
l
EDK82ZAFUC010 DE/EN/FR 5.0