Configuring The Host System (Master) - Lenze E82ZAFPC201 Instructions De Montage

Configuring the host system (master)

The host must be configured before communication with the communication module is
possible.
Master settings
For configuring the PROFIBUS, the device data base file (GSE file) of the communication
module has to be imported into the configuring software of the master.
I
Tip!
The GSE file can be downloaded from www.Lenze.com.
EDK82ZAFPC−201 DE/EN/FR 7.0
Configuring the host system (master)
l
Commissioning 7
67