Cleaning, Checks And Storage/ Troubleshooting - Christopeit Sport WP 1500 Notice De Montage Et D'utilisation

CLEANING, CHECKS AND STORAGE
1. Cleaning
Use only a less wet cloth for cleaning. Caution: Never use benzene, thinner or other aggressive cleaning agents for surface cleaning as this dam-
age caused. The device is only for private home use and for use suitable indoors. Keep the unit clean and moisture from the device.
2. Storage
Remove the batteries from the computer while intending the unit for more than 4 weeks not to use. Fold up the seat frame and secure with lock-
ing pin. Choose a dry storage in-house and spray some oil to the thread of the handlebar bolt for fold up function. Cover the bike to protect it
from being discolor by any sunlight and dirty through dust.
3. Checks
We recommend every 50 hours to review the screw connections for tightness, which were prepared in the assembly. Every 100 operating hours,
you should spray some oil at the thread of the handlebar bolts for fold up function.
TROUBLESHOOTING
Problem
Computer has no value at Dis-
play if you press any key.
Computer is not counting data
and do not switch on after start
cycling.
Computer is not counting data
and do not switch on after start
cycling.
If you cannot solve the problem with the following information, please contact the authorized service center.
Training area in mm
(for home trainer and user)
Potential reasons
No Batteries insert or batteries empty
Sensor impulse missing base on not well
plugged connection
Sensor impulse missing base on not cor-
rect position of sensor.
Solutions
Check the position of batteries at battery compartment or re-
place batteries.
Check the plug connections at computer.
Check the distance between magnet and sensor. The magnet
which is positioned in front at pulley unit should have only less
than < 5mm distance against the sensor position.
17
Free area in mm
(Training area and security area
(rotating 60cm))
GB