Correct Posture; General Notes - Beurer BM 26 Mode D'emploi

Masquer les pouces Voir aussi pour BM 26:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ues are different. Always perform the measurement on the
same arm. If the values between the two arms are signifi-
cantly different, please consult your doctor to determine
which arm should be used for the measurement.
Important: This device should only be operated with the
original cuff. The cuff included with the device is suit-
able for an upper arm circumference of 8.6 – 16.5 in
(22 – 42 cm).
Replacement cuffs from other models cannot be used
with this model. Doing so, will result in inaccurate read-
ings or error messages.
CAUTION:
• Only use genuine Beurer cuffs with this device. The
included cuff is suitable for an arm circumference of
8.6 – 16.5 in (22 – 42 cm).

6.2 Correct Posture

• Rest for at least five minutes before each measurement.
• Perform the measurement either sitting or lying down.
Always make sure that the cuff is level with your heart.
• In order not to distort the result, it is important to keep
still during the measurement and not talk. The most
precise measurement results are obtained if you strive
for arelaxed measurement situation. You may close your
eyesand breathe calmly during the measurement and
don't cross your legs.
• Please note that any muscle movement during infla-
tionor deflation can cause measurement error.

6.3 General Notes

• For reliable monitoring and reference of blood pressure,
keeping long-term records is recommended.
• To minimize measurement variations due to physical
activity, rest at least 5 minutes before measuring your
blood pressure (or 15 minutes after strenuous activity).
You should not be physically tired or exhausted while
taking measurement.
• In order to obtain a resting condition blood pressure,
avoid eating, drinking alcohol and caffeinated bever-
ages, smoking, exercising, and bathing for at least 30
minutes before taking a measurement.
• Stress raises blood pressure.
• Perform measurements in a quiet and relaxed environ-
ment at room temperature.
• Always wait at least 5 minutes between measure-
ments to allow the blood circulation in your arm to
13

Publicité

Table des Matières
loading

Table des Matières