Porsche Home Energy Manager Manuel D'utilisation page 52

Start-up
Opening the Web Application via hotspot
b The energy manager is switched on. The energy
manager automatically enables its WiFi hotspot.
1. If WiFi status does not flash or light up blue,
press the WiFi button on the energy manager.
2. On your device, press the network or WiFi icon
on the taskbar or notification panel.
3. Select your WiFi network from the list. The name
of the WiFi network is the same as the SSID in
the letter containing access data, and is shown
as HEM-#######.
4. Select the Connect button.
5. Enter the security code. The security code is
shown as WiFi PSK in the letter containing your
access data.
�� The connection to the WiFi network is es-
tablished.
Note: In the Windows 10 operating system,
you are first asked to enter the router PIN.
Select the link Establish connection with
PLC security code, then enter the code.
6. Open your browser.
7. Enter the IP address of the energy manager in
the address bar of your browser:192.168.9.11
– or –
Enter the DNS address of the energy manager
in the address bar of your browser: https://por-
sche.hem
g Refer to the Porsche Home Energy Manager Oper-
ating Manual
.
50
OpeningWeb Application via WiFi (WPS
function)
1. Press the WPS button on the network router.
2. Within 2 minutes, press the WPS button on the
energy manager.
3. Select the appropriate network in the router set-
tings and find out the IP address of the energy
manager.
4. Enter the IP address of the energy manager in
the address bar of your browser.
g Refer to the Porsche Home Energy Manager Oper-
ating Manual
.
Information
Some routers offer the option of accessing the Web
Application using the host name Porsche HEM.
Ethernet
1. Connect the Ethernet cable to the energy man-
ager (port ETH0).
2. Select the appropriate network in the router set-
tings and find out the IP address of the energy
manager.
3. Enter the IP address of the energy manager in
the address bar of your browser.
PLC client
The energy manager can be integrated in a PLC net-
work as a client.
Note: For this, you will need a PLC modem with
HomePlug standard (not included in the scope of
delivery).
e
On the PLC modem, enter the security code of
the energy manager to register it in the PLC
network.
– or –
Press the pairing button on the PLC modem,
then press the PLC button on the energy man-
ager within 60 seconds.
Redirecting to the Web Application
Information
Depending on which browser you are using, the Web
Application may not open immediately. Instead, a no-
tice regarding the browser's security settings may be
displayed first.
1. In the browser warning message that appears,
select Advanced.
2. In the next dialogue box, select Add exception.
�� The SSL certificate is confirmed and the
Web Application opens.
Logging in as Customer Service
Two users (user roles) are available for logging into
the Web Application: Home user and Customer serv-
ice.
The Customer service user may only be used by a
qualified electrician or Porsche service partner. The
qualified electrician is responsible for setting up the
energy manager. He or she runs the installation assis-
tant, carries out home installation and has access to
all the configuration options in the Web Application.
Logging into the Web Application
b The access data is to hand.