Porsche Home Energy Manager Manuel D'utilisation page 50

Overview
Displays and controls
Fig. 13 Displays and controls
Displays Description
LED lights up green: Energy man-
ager is ready for operation.
Status
On/Off
LED lights up green: Internet con-
nection established
Internet
status
LED flashes blue: Hotspot mode, no
client connected
WiFi status
LED lights up blue: Hotspot mode,
at least one client connected
LED flashes green: Client mode, no
WiFi connection available
48
Displays Description
LED lights up green: Client mode,
WiFi connection available
LED lights up or flashes blue: Paral-
lel operation in client mode is possi-
ble.
LED flashes green: Searching for
PLC network connection.
Status of
LED lights up green: PLC network
Powerline
connection in place.
Communi-
LED flashes blue: Enabling DHCP.
cation
(PLC) net-
LED lights up blue: DHCP (for PLC
work
only) is active and PLC network
connection is in place.
LED lights up green: Network con-
nection in place.
Ethernet
status
On: LED lights up green during com-
munication (currently not assigned).
RS485/CA
N status
LED flashes or lights up yellow: Fault
present
Fault sta-
LED lights up red: Functions restric-
tus
ted
Controls Description
e
To establish a WiFi connection
using the WPS function, briefly
Press WPS
press the WPS button (only
button
network connection as client
possible).
e
To enable WiFi, press the WiFi
button briefly.
WiFi but-
e
To disable WiFi, press and hold
ton (hot-
the WiFi button for more than 1
spot)
second.
e
To enable the PLC connection,
briefly press the PLC pairing
PLC pairing
button.
button
e
To enable the energy manager
as DHCP server (for PLC con-
nections only), press and hold
the PLC pairing button for more
than 10 seconds.
e
For a PLC connection to a cli-
ent, briefly press the PLC pair-
ing button again.