Porsche Home Energy Manager Manuel D'utilisation page 51

Controls Description
e
To restart the device, press the
Reset button for less than 5
Reset but-
seconds.
ton
e
To reset the passwords, press
and hold the Reset and CTRL
buttons for between 5 and 10
CTRL but-
seconds.
ton e
To restore the device to its fac-
tory settings, press and hold
the Reset and CTRL buttons
for more than 10 seconds. This
overwrites all current settings.
USB connection
USB con-
nection
e
For information on network connection options,
see the manual of the Web Application Porsche
Home Energy Manager.
Start-up
Initial start-up
After the energy manager has been installed, the de-
vice must be configured for initial start-up.
Information
Initial start-up may only be carried out by a qualified
electrician.
During initial start-up, a setup wizard guides the
electrician through the necessary settings, e.g. con-
nections, user profile, optimised charging. Some of
the settings entered here, such as those involving
the system and maintenance, can also be changed
later on by the home user. When the setup wizard
has finished, the qualified electrician must then carry
out home installation (which includes configuring the
current sensors and adding EEBus devices) in the
Web Application.
After this, the energy manager is ready for operation.
Requirements for initial start-up
Have the following information to hand for setting up
the energy manager:
– Letter containing access data for logging into the
Web Application
– Access data for your home network
– Access data for the user profile (to link it with
your Porsche ID)
– Information on electricity tariffs/prices and any
feed-in remuneration
The Web Application supports the following brows-
ers:
–
Google Chrome version 57 or later (recommen-
ded)
–
Mozilla Firefox version 52 or later (recommen-
ded)
–
Microsoft Internet Explorer version 11 or later
–
Microsoft Edge
–
Apple Safari version 10 or later
Establishing a connection to the
device
To enable access to the Web Application of the en-
ergy manager, a connection must be established be-
tween your device (PC, tablet or smartphone) and the
energy manager. For an overview of all connection
options, g Refer to chapter "5. Selecting a network
connection" on page 52.
e
Select the connection type suitable for the pre-
vailing signal strength and availability.
WiFi
There are two options for a WiFi connection:
– Hotspot:
The energy manager has a wireless access point
(hotspot), which is password-protected and re-
quires manual login. A WiFi-capable end device
can connect to the hotspot and then access the
Web Application of the energy manager.
–
WiFi network via WPS function:
The energy manager can be paired with an exist-
ing home network, e.g. network router, using the
WPS function, without entering a password.
Start-up
49