Publicité
BRAKE PAD INSPECTION/DRIVE CHAIN
ESS00062
BRAKE PAD INSPECTION
1. Apply the brake lever.
2. Inspect:
S Brake pad thickness a
Out of specification ! Replace brake pad as
a set.
Wear limit a :
10 mm (0.39 in)
ESS00065
DRIVE CHAIN
ESS00066
Oil level inspection
WARNING
The engine and muffler will be very hot after
the engine has run. Avoid touching a hot en-
gine and muffler while they are still hot with
any part of your body or clothing during in-
spection or repair.
1. Place the machine on a level surface.
2. Remove:
S Muffler
3. Place a rag under the checking hole 1 (oil
level).
4. Remove:
S Filler cap 1
S Checking screw 2
S Gasket (checking screw)
5. Inspect:
S Oil level (drive chain housing)
Oil flows out ! Oil level is correct.
Oil does not flow out ! Oil level is low.
Add oil until oil flows out.
Recommended oil:
Gear oil API GL-3 SAE
#75 or #80
6. Inspect:
S Gasket (checking screw)
Damage ! Replace.
2-19
INSP
ADJ
Publicité
