Publicité
IMPORTANT INFORMATION
ESS00015
IMPORTANT INFORMATION
ESS00016
PREPARATION FOR REMOVAL AND DIS-
ASSEMBLY
1. Remove all dirt, mud, dust, and foreign mate-
rial before removal and disassembly.
While cleaning, take care to protect the elec-
trical parts, such as relays, switches, motor,
resistors, controllers, etc., from high pres-
sure water splashes.
2. Use proper tools and cleaning equipment.
Refer to "SPECIAL TOOLS".
3. When disassembling the machine, keep
mated parts together. This includes gears,
cylinders, pistons, and other parts that have
been "mated" through normal wear. Mated
parts must be reused or replaced as an as-
sembly.
4. During disassembly of the machine, clean all
parts and place them in trays in the order of
disassembly. This will speed up assembly
time and help ensure that all parts are rein-
stalled correctly.
5. Keep all parts away from any source of fire.
6. Be sure to keep to the tightening torque
specifications. When tightening bolts, nuts,
and screws, start with those that have larger
diameters, and proceed from the inside to
the outside in a crisscross pattern.
1-2
GEN
INFO
Publicité
