Publicité
CDI MAGNETO
ESS00171
REMOVAL
1. Remove:
S Nut 1 (CDI magneto)
NOTE:
Attach the universal rotor holder 2 to hold the
CDI magneto.
Universal rotor holder:
90890-01235, YU-01235
2. Remove:
S Rotor 1
NOTE:
Attach the rotor holding puller 2 to the CDI
magneto and fully tighten the tool holding bolts,
but make sure the tool body is parallel with the
CDI magneto.
Rotor holding puller:
90890-01362, YU-33270
3. Remove:
S Stator assembly 1
S Woodruff key 2
5-21
ENG
Publicité
