Installing The Card Tray; Using Optional Accessories - Sony UP-D6500 Mode D'emploi

Installing the Card Tray

Printed cards are ejected into the card tray. Install the
card tray with this procedure.
When installing the optional Auto Card Stacker, the
card tray should be installed after the Auto Card
Stacker (page 16).
1
Insert the card tray hook into the insertion slot on
the printer.
Card Tray

Using Optional Accessories

Optional accessories for these printer models include
the UPA-6003 Auto Card Feeder to automatically feed
cards to the printer when printing, and the UPA-6002
Auto Card Stacker to receive printed cards from the
printer.
Supplied
card tray
UP-D6400/D6300/D6500
Continuously prints up to about 125 ISO
standard 0.76-mm-thick cards.
14
Preparation
Hook
Option
Supplied
card tray
UPA-6003
Auto Card Feeder
2
Pull the card tray down.
Pull down
Note
Be sure to pull the card tray down completely, or cards
may fail to eject and jam in the printer.
One Auto Card Feeder can be installed on the UP-
D6400/D6300, and up to two Auto Card Feeders and
one Auto Card Stacker can be installed on the UP-
D6500. The supplied card tray can also be installed
when the Auto Card Stacker is installed.
Option
UP-D6500
UPA-6002
Auto Card Stacker
Continuously prints up to about 250 ISO
standard 0.76-mm-thick cards.
UPA-6003 UPA-6003
Auto Card Feeder Auto Card Feeder
(1st Unit) (2nd Unit)