Publicité
Les langues disponibles
Les langues disponibles
GB
•
Avoid an abnormal body posture.
Ensure that your footing is secure
and keep your balance at all times.
This will help you to have better con-
trol of the power tool in unexpected
situations.
•
Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep
hair, clothes and gloves away from
moving parts. Loose clothing, jewel-
lery or long hair may get caught in
moving parts.
•
If dust extraction and collection de-
vices can be attached, ensure that
they are properly fastened and are
used properly. Using a dust collector
can reduce hazards caused by dust.
•
Hold the power tool only by the insu-
lated gripping surfaces as the cutting
blade may come into contact with con-
cealed power lines or the tool's own
mains cable. Contact with a live wire
can also cause a charge in metal parts
of the appliance and result in an elec-
tric shock.
Using and handling the power tool:
•
Do not overload the device. Use
the correct power tool for the job in
hand. With the right power tool, you
can work better and more safely within
the specified power range.
•
Do not use the power tool with a
damaged switch. A power tool that no
longer switches on or off is dangerous
and must be repaired.
•
Remove the plug from the wall
socket and/or remove the rechar-
geable battery before you change
the settings of the device, change
accessory parts or put away the de-
vice. These safety measures prevent
accidentally starting the power tool.
126
•
Store unused power tools out of
reach of children. Do not allow per-
sons to use the device who are not
familiar with it or who have not read
these operating instructions� Power
tools can be dangerous if operated by
inexperienced persons.
•
Look after power tools carefully.
Check that the moving parts are
working properly and are not beco-
ming jammed and that parts are not
broken or damaged in such a way
that the functioning of the power
tool is impaired. Have damaged
parts repaired before using the de-
vice. Many accidents are caused by
poorly maintained power tools.
•
Keep the cutting tools sharp and
clean� Carefully maintained cutting
tools with sharp cutting edges are less
likely to get jammed and are easier to
work with.
•
Use the power tool, accessories,
tools etc. in accordance with these
operating instructions� Take into
account the working conditions and
the work to be carried out. Using the
power tool for anything other than its
intended use can lead to dangerous
situations.
•
Carefully inspect the surface to be cut
and remove all wires and other foreign
bodies.
•
Check the device before each use for
obvious defects such as loose, worn
or damaged parts. Check the device
for significant damage or defects if it is
dropped or suffers an impact.
Service:
•
Have your power tool repaired only
by qualified specialists and only
with original spare parts� This will
ensure that the power tool remains
safe.
Publicité
