Publicité
Les langues disponibles
Les langues disponibles
The vibration emission value has been
measured according to a standardised
testing method and may be used for com-
parison with another power tool. The indi-
cated vibration emission value may also
be used for an introductory assessment of
the exposure.
Warning:
The vibration emission value whilst
actually using the power tool may
vary from the given values regard-
less of the type and way in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. All parts of the ope-
rating cycle have to be considered
while doing so (for example, times
when the power tool is switched off
and times when it is switched on
but running without any load).
Graphical symbols
Symbols on the device
Attention!
Read the instruction manual!
Wear personal protective equip-
ment. Always wear protective gog-
gles, hearing protection and safety
helmet.
Wear cut-resistant work gloves.
Wear cut-resistant work clothing.
Wear non-slip safety shoes.
Keep persons in the vicinity away
from the device.
Do not expose the device to rain.
The device must not be operated
while damp nor in a damp environ-
ment.
Risk of injury due to ejected parts.
Danger to life from electrical shock!
10 m
Stay at least 10m away from over-
head power lines.
Attention! Falling objects. Parti-
cularly at the section above head
room.
Attention! Risk of injury from mo-
ving blades.
Pull out mains plug immediately,
if the mains cable is damaged,
entangled or severed, as well as if
the device will be left unattended
even for a short period of time.
Indication of sound power level
L
in dB (hedge trimmer)
WA
Indication of sound power level
L
in dB (pruner)
WA
Electrical devices must not be dis-
posed of with domestic waste.
Protection class II (double insulati-
on)
GB
123
Publicité
