Error Messages; On / Off Switch - Baxtran ARN Manuel D'utilisation

4.3 ERROR MESSAGES

DISPLAY
-O.L-
Err06
Err07
Err12
Err98

4. 4 ON / OFF SWITCH

SWITCHING ON THE INDICATOR
Start up the indicator. Shortly press the Key
22
The weighing system has been overloaded. Remove weight.
Signal from the sensor on AD converter is too high. Check sensor connection..
No signal from the sensor on AD converter. Check sensor connection..
Span calibration data lost. Recalibrate the system.
Calibration point must be higher than previous one and higher than value of 25.
Or enterered value calibration point value is equal to 0000..
Symbol is blinking:
The battery voltage level is running low. The battery has to be charged.
Flahing M:
memory is full ( >99.999 kg cannot be shown by using 5 digits), no weights
can be accepted te be added. Erase memory.
SWITCHING OFF THE INDICATOR
Switch off the indicator by keeping both keys
simultaneously pressed for 2 seconds.
USER'S MANUAL ARN
and
EN