Zero Check Before Weighing & Correction - Baxtran ARN Manuel D'utilisation

THE INDICATOR WILL SWITCH OFF AUTOMATICALLY
The indicator will switch off automatically after 2 minutes if no key press and no motion.
4.5 ZERO CHECK BEFORE WEIGHING & CORRECTION
1.
Start up the indicator. Shortly press the ON key.
3. Lift the forks to the reference height and check the
zero value in the display.
5. When the deviation is more than +/- 5 kg, the zero
value can be corrected by pressing the Zero key
shortly.
2.
Be sure the forks of the hand pallet truck are empty.
4. The forks are at the reference height. Check the zero value
in the display.
6. The indicator will directly go back to the normal weighing
mode.
USER'S MANUAL ARN EN
23