Publicité
Les langues disponibles
Les langues disponibles
EngLIsh
e ) Switch on the motor only when the hands and feet are
away from the cutting means.
f ) Always disconnect the machine from the power
supply (i.e. remove the plug from the mains, remove the
disabling device or removable battery)
•
whenever the machine is left unattended;
•
before clearing a blockage;
•
before checking, cleaning or working on the machine;
•
after striking a foreign object;
•
whenever the machine starts vibrating abnormally.
g ) Take care against injury to feet and hands from the
cutting means.
h ) Always ensure that the ventilation openings are kept clear
of debris.
i ) When using the brush cutter there is a risk of
kickback if it contacts a solid object (tree trunk,
branch, or rock). The unit will kick to the opposite
direction of the brush cutter blade's rotation.
j ) Remove any objects that may cause kickback, such as
branches and rocks.
k ) Check for loose fasteners and damaged parts, such as cracks in
the cutting attachment.
Maintenance and Storage
a ) Disconnect the machine from the power supply (i.e.
remove the plug from the mains, remove the disabling
device or removable battery) before carrying out
maintenance or cleaning work.
b ) Use only the manufacturer's recommended replacement
parts and accessories.
c ) Inspect and maintain the machine regularly. Have
the machine repaired only by an authorized repairer.
d ) When not in use, store the machine out of the reach
of children.
e ) Use blade cover for metal blades during transport
and storage.
f ) Clean before storing, including the use of guards on
cutting attachments with metal blades.
ADDITIONAL SAFETY INSTRUCTIONS FOR
GRASS TRIMMERS / BRUSH CUTTERS
WARNING: Cutting elements continue to rotate after the
motor is switched off.
•
Wear long trousers to protect your legs.
•
Before using the appliance, check that your cutting path is free
from sticks, stones, wire and any other obstacles.
•
Only use the appliance in the upright position, with the cutting
line near the ground. Never switch the appliance on in any
other position.
•
Move slowly when using the appliance. Be aware that freshly
cut grass is damp and slippery.
•
Do not work on steep slopes. Work across the face of slopes,
not up and down.
30
•
Never cross gravel paths or roads while the appliance
is running.
•
Never touch the cutting line while the appliance is running.
•
Do not put the appliance down until the cutting line has come
to a complete standstill.
•
Use only the appropriate type of cutting line. Never use metal
cutting line or fishing line.
•
Keep hands and feet away from the cutting line and blade at
all times, especially when switching on the motor.
•
Before using the appliance and after any impact, check for
signs of wear or damage and repair as necessary.
•
Take care against injury from any device fitted for trimming
the filament line length. After extending new cutter line always
return the machine to its normal operating position before
switching on.
•
Close supervision is necessary when the appliance is used
near children.
•
This appliance is not intended for use by young or infirm
persons without supervision.
•
This appliance is not to be used as a toy.
•
Use in a dry location only. Do not allow the appliance to
become wet.
•
Do not immerse the appliance in water.
•
Do not open the body casing. There are not user-serviceable
parts inside
•
Do not operate the appliance in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
•
When the appliance is stored or transported in a vehicle
it should be placed in the boot or restrained to prevent
movement following sudden changes in speed or direction.
•
When not in use, the appliance should be stored in a dry, well
ventilated place out of reach of children.
•
Children should not have access to stored appliances.
Safety of Others
•
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
•
Children must be supervised to ensure that they do not play
with the appliance.
Residual Risks
To ensure you have good footing on slopes, do not overreach.
Keep your balance at all times. Always walk, do not run.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks can
not be avoided. These include:
•
Injuries caused by touching any rotating/moving parts.
Publicité
