Accessories; Service Information - DeWalt D55371 Guide D'utilisation

Compresseur d'air portatif avec la pompe scellée et lubrifiée
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

NOTICE: Risk of property damage. Drain water from air tank may
contain oil and rust, which can cause stains.
6. When air tank pressure gauge reads 10 psi, rotate valve to the
fully open position.
7. Close drain valve when finished.
Checking Air Filter Element (Fig. 1)
WARNING: Hot surfaces. Risk of burn. Outlet tube, pump head,
and surrounding parts are very hot, do not touch. Allow compressor
to cool prior to servicing.
1. Ensure Auto/Off switch (L) is in the OFF(O) Position.
2. Allow unit to cool.
3. Remove filter cover (J) from filter base.
4. Remove element from filter base.
5. Place new element back in filter base. Purchase
replacement parts from your local dealer or
authorized service center. Always use identical
replacement parts.
6. Snap filter cover to filter base.
NOTICE: Risk of property damage. Do not operate without air
inlet filter

ACCESSOrIES

WARNING: The use of any other accessory not recommended for
use with this tool could be hazardous. Use only accessories rated
equal to or higher than the rating of the air compressor.
Recommended accessories for use with your tool are available
for purchase from your local dealer or authorized service center.
If you need assistance in locating any accessory for your tool,
please contact D
WALT Industrial Tool Co., 701 East Joppa Road,
e
Baltimore, MD 21286, call 1-800-4-D
our website www.dewalt.com.
J
WALT (1-800-433-9258) or visit
e

SErVICE INFOrMATION

Please have the following information available for all service calls:
Model Number ____________ Serial Number _________________
Date and Place of Purchase ______________________________
repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by a D
center, a D
WALT authorized service center or other qualified
e
service personnel. Always use identical replacement parts.
Full One Year Warranty
D
WALT heavy duty industrial tools are warranted for one year from
e
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information, call
1-800-4-D
WALT (1-800-433-9258). This warranty does not apply to
e
accessories or damage caused where repairs have been made or
attempted by others. This warranty gives you specific legal rights and
you may have other rights which vary in certain states or provinces.
lAtIn AMerICA: This warranty does not apply to products sold
in Latin America. For products sold in Latin America, see country
specific warranty information contained either in the packaging, call
the local company or see website for warranty information.
16
WALT factory service
e

Publicité

Table des Matières
loading

Table des Matières