Homa C239 WE2 Manuel D'instructions Original page 24

3.3.1. Type plate
No. Description
1 Typ description
2 Serial number
3 Impeller diameter
4 Temperature of medium
5 Immersion depth
6 Weight
7 Hmax (delivery head max)
8 Hmin (delivery head min)
9 Qmax (delivery volume max) 22
10 Standard
11 Construction product test lab
12a Year type test
12b Declaration of performance
13 Build year
3.3.2. Motor
The motor consists of an engine block and the engine
shaft with the impeller assembly. The circuit for power
supply is designed for the maximal mechanical perfor-
mance according to the characteristics or the nameplate
of the pump. The cable inlets as well as the circuit are
sealed resistant to jet water towards the pumped medi-
um. The shaft bearing is carried out by means of robust,
maintenance-free and permanently lubricated antifriction
bearings.
General motor nameplate data
Service factor
Operating mode
Permitted medium temperature
Protection class
Standard cable length
Voltage
24 | EngliSH
No. Description
14 Motor type
15 IE Marking
16 Frequency
17 Voltage
18 Nominal current
19 Motor RPM
20 Power P1
21 Cos phi
Insulation class
23 Power P2
24 Start condenser
25 Operating condenser
26 Protection class
27 Operating class
28 Text field sales
1.15
S2 20min / S3 40%
35°C
IPX8
10 m
230V / 1Ph / 50Hz
Warning - rotating impeller!
Do not touch the rotating impeller or do not reach the
pump chamber through the pressure socket!
Never put your hands into the pump chamber or
touch the rotating parts in operating mode. Switch
the machine off and let the rotating parts come to
gridlock before carrying out maintenance work or
repair work!
Motor cooling
Sufficient motor cooling is also provided for in snore op-
eration due to the water jacket with pressure connection
on top.
3.3.3. Impeller
The impeller is fixed on the engine shaft, which powers it.
The impeller is an open multi-channel impeller,
for drainage water containing soft solids with a maximum
diameter of 10 mm.