Publicité
Les langues disponibles
Les langues disponibles
EN G LIS H
MAINTENANCE
Your D
WALT power tool has been designed to
e
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories. Before
reconnecting the tool, depress and
release the trigger switch to ensure that
the tool is off.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D
WALT recommended
e
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
12
ACCESSORY CHART
D
D
b
D
Protecting the Environment
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D
WALT provides a facility for the collection and
e
recycling of D
WALT, have
e
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
WALT office at the address indicated in this
e
manual. Alternatively, a list of authorised D
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
Max.
Min.
[mm]
Rotation
[mm]
[min.
D
b
d
-1
d
230 6 22,23
6,500
b
180 –
–
8,500
d
75 30 M14
8,500
D
180 12 M14
8,500
230 12 M14
8,500
Separate collection. This product must
not be disposed of with normal
household waste.
Separate collection of used products and
packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
WALT products once they have
e
Periphical
Threaded
speed
hole length
]
[m/s]
[mm]
80
–
80
–
45
20.0
80
20.0
80
20.0
WALT product
e
WALT
e
Publicité
