Publicité
Les langues disponibles
Les langues disponibles
5.6 EMPTYING THE GRASS CATCHER
The full level of the grass catcher is signalled by the full grass catcher flap. It is possible to
regulated the full level of the grass catcher by moving the sliding part of the flap (extending
or shortening the arm).
(1) Sliding part extended = grass catcher filled to minimum
(2) Sliding part retracted = grass catcher filled to maximum
Procedure for emptying:
Drive the machine to the location where you wish to empty the grass catcher. Stop the machine and
apply the brake. If on a slope, use the parking brake.
Disengage the mowing deck by pushing down the engagement switch.
If the AUT/MAN switch is installed on the machine, leave this switch in position "AUT".
Set the throttle lever to position "MIN".
On machines with manual lifting and tilting of the grass catcher:
Slide the grass catcher lifting lever handle completely upwards (1) and tilt it down (2) to tip
out the grass catcher, allow it to empty freely, slowly release it and tilt it back.
After tilting the grass catcher down to the default position, turn on the mowing deck using the flip
switch.
95
5.6a
5.6b
Publicité
