Publicité
Les langues disponibles
Les langues disponibles
9. DISPOSAL OF THE MACHINE
After the operational life of the machine is over, the owner of the machine is responsible for its disposal.
This may be performed in two ways:
a) Hand the machine over to an authorised company (scrap yard, secondary waste collection point, etc.).
You will receive documented confirmation of the handover for disposal.
b) Dispose of the machine yourself. In this case we recommend the following procedure:
Dispose of the product utilising recyclable material according to the applicable waste disposal law.
Disassemble the entire machine.
Parts that can be reused should be cleaned, preserved and stored for further use.
Sort the remaining parts into those that are and are not environmentally friendly, e.g. rubber parts
(gaskets), lubricant remains in the bearings or on gears. The environmentally harmful components
must be handled according to the relevant waste disposal law applicable in the country of the user,
e.g. in the Czech Republic it is the Waste Act No. 185/2001 Coll.
Sort the waste according to the Wastes Catalogue in accordance with the relevant ordinance.
Ecologically friendly waste shall be treated as reusable material.
111
Publicité
