Publicité
Les langues disponibles
Les langues disponibles
5.3.1 LEAVING THE MACHINE WHILE THE ENGINE IS RUNNING
If you want or need to leave the machine for a while (e.g. in order to remove obstacles, etc.) and you
intend to then continue mowing, it is possible to get off and leave the engine running. This saves the
machine's battery.
Conditions for getting off the machine with the engine running:
the mowing deck is disengaged
the throttle control lever is in position "MIN"
the gear is in neutral and the hand brake is activated (the brake indicator light is on)
5.4 ENGAGING AND DISENGAGING THE MOWING DECK
5.4.1 ENGAGING THE MOWING DECK
Move the throttle lever to position "MAX".
Using the mowing deck elevation adjustment lever set the position of the mowing deck and thereby
the mowing height.
Set the mowing deck activation switch to position "ACTIVATED".
Conditions for engaging the mowing deck:
- the driver is sitting in the seat of the machine
- the grass catcher, or the deflector or the exhaust chute cover is installed
- the AUT/MAN switch (optional accessory) is in position "AUT" and the grass catcher is
empty
- the AUT/MAN switch (optional accessory) is in position "MAN".
5.4.2 DISENGAGING THE MOWING DECK
Disengage the mowing deck by pushing down the engagement switch.
- If the driver leaves the seat, the engine will automatically shut down and thereby the
rotation of the mowing blades also.
- However, never turn off the mowing deck by simply leaving the seat. If you do not move
the key in the ignition from the position "ON" to position "STOP", then a part of the electrical
installation will still be live and this may result in it being damaged. Also the motor hours
counter remains activated.
5.4.3 SETTING THE ELEVATION OF THE MOWING DECK FOR MOWING
If you wish to set the mowing deck higher off the ground, move the mowing deck
elevation adjustment lever upwards.
If you wish to set the mowing deck closer to the ground, move the mowing deck
elevation adjustment lever downwards.
- Position "1" is used to copy the unevenness of the terrain. Do not use this height permanently
as this could lead to increased wear of parts on the mowing deck.
If you wish to lower or increase the control force for lifting the mowing deck, it is necessary to adjust the
draw bars, which determine the height of the mowing deck. Proceed as follows:
92
Publicité
