Changing The Vertical Lighting - Carrier GD60 Manuel D'instructions

Fig. 6
Fig. 7
Fig. 8
Fig. 9
10 Maintenance
10.2

Changing the vertical lighting

Unplug power plug !
Wear safety gloves when cleaning and ser-
vicing the device (risk of injuries).
- Disconnect cabinet (see section 11).
Unclip the cover on the inside at the top on the
-
side pointing towards the display compartment
(see fig. 6) on which the lamp is to be changed.
Completely remove the cover.
-
- Remove the fluorescent lamp from the bracket
(see fig. 7 and 8).
- Insert new fluorescent lamp.
- Position the cover and press (see fig. 10), until it
has completely engaged.
- Start cabinet (see section 5).
We recommend a starter change with each
lamp change (see section 10.4).
Fig. 10
43