Changing Over Door Hinges - Carrier GD60 Manuel D'instructions

4 Installation

4.3 Changing over door hinges

The changing from right-hinged to left-hinged door requires a new spring. This left spring is standard scope of
supply of the bottle coolers. The bottle cooler door can be changed from right-hinged to left-hinged as follows:
Step : Loosen two screws (13, 14) with screw driver. Remove front grid (12).
Step : Loosen and remove the hinge fastening screws (8, 10, 11, 17) and the transportation lock (15, 16).
Step : Remove 2 hinge pins of display end cover (18,19) with a screw driver and remove cover for canopy (1).
Step : Unscrew screw (4) and remove the door.
Step + : Remove the hinge pins(2, 3, 5.1) as shown in fig.
Step : Unscrew the door handles by the screws (13, 14, 15) and fit on opposite side as shown in fig.
Step + + : Mount all parts according to fig.
and replace on the opposite side(2, 3, 5.2), fig.
, and
.
17