Stand-Alone Installation - Carrier GD60 Manuel D'instructions

Fig. 4
Fig. 5 Fig. 5
4 Installation
Installation options are:
Stand-alone installation against a wall or in a corner
-
(fig. 4)
In all installation options, air exit must be un-
hindered through the ventilation slots in the
cabinet top to exclude accumulation of heat.
Only then is trouble-free operation guaranteed.

4.2 Stand-alone installation

When the cabinet is installed as a stand-alone unit
against a wall, a min. distance of 50 mm (Pepsi version:
75 mm) must be maintained between cabinet back and
room wall to ensure free air exit on the cabinet back.
When the cabinet is installed as a stand-alone unit in a
corner, no minimum distance between endwall and
room wall is required. GD60 and GD100 have distance
elements on the rear ex works (see fig. 5, 6).
Fig. 6
15