Table des Matières
Publicité
Fig. 7
4 Installation
4.5 Installation procedure
Remove packaging and transport guards.
-
When lifting please consider the weight of the
cabinet (see Specifications).
Mount accessories as described in the specific
-
mounting instructions.
Only use original accessories to avoid possi-
ble damage to the cabinet.
Install cabinet at the desired location.
-
Observe specifications on the desired instal-
lation form.
Perform horizontal alignment of the refrigerated
-
cabinet on the sides and ends using a water level.
If necessary, correct height alignment per hand at
the leveller feet (see fig. 7):
GD60, GD100: 4 feet
GD220, GD300, GD380, GD440: 2 feet + 2 rollers
GD880: 4 feet + 4 rollers
21
Publicité
Table des Matières
