Repairs; Accessories; Pc Operating Software - Endress+Hauser RMA 422 Mise En Service

Process transmitter
Green Red Effect
LED LED
On Flash The 7
segment
display
shows a
meas. value

6.2 Repairs

When returning units for repair please enclose a small fault
description and a description of the application.
Warning:
The units should not be independently repaired.
Disposal:
When disposing of the units please follow the national waste
disposal regulations.

6.3 Accessories

Description
Plug on terminal strip analogue input 1 blue (3pole)
Plug on terminal strip analogue input 1 grey (3pole)
Plug on terminal strip analogue input 2 blue (3pole)
Plug on terminal strip analogue input 2 grey (3pole)
Plug on terminal strip analogue output grey (4pole)
Plug on terminal strip relay 1 grey (3pole)
Plug on terminal strip relay 2 grey (3pole)
Plug on terminal power supply grey (4pole)

7. PC operating software

On operating manual for the PC operating software can be
found on the installation medium (e.g. CD-ROM).
68
Cause
The measured value allocated to the
analogue output is above the 110%
value of the analogue output.
Fault Solution
code
Please check if the
input signals are valid
or whether the
calculated values are
within a valid range,
or allocate a larger
value to the 100%
value of the
E 241 analogue output 1 ,
E 251 analogue output 2.
Order number
510 01991
510 02036
510 02023
510 02034
510 02024
510 00687
510 00688
510 00691