The "Quick-Set" Function - Endress+Hauser RMA 422 Mise En Service

4.3 The "Quick-Set" function

Alarm set points must be set quickly
and the fault condition also swiftly
recognised in process failures.
Using the "Quick-Set" function the
alarm set points of active limits can be
simply changed by avoiding the
operating menu.
The actual failure code is also
transmitted on process failures.
Please take note of any effects
changing the switch points can have
on the process.
* Only active set points are displayed.
** The fault code is only displayed
during process failures.
Process transmitter
Actualr
Meas. Value
Switch point 1
+
and
-
Switch point
entered
Switch point 2
+
and
-
Switch point
entered
Output of actual
fault code on
process faults
+
and
-
Display actual
fault code
Save after
changes
Return
E
+
and
*
+
or
-
E
E
*
+
or
-
E
E
**
+
or
-
E
E
47