The "Fast Measured Value Display" Function - Endress+Hauser RMA 422 Mise En Service

Process transmitter

4.4 The "Fast measured value display" function"

Fast information from the process is very important. This
includes the display of individual measurements. The display
always shows the measurement that has been set with the
DISOW
A different measured value can be displayed by operating the
(+) or (-) push buttons. The original value is displayed after
approx. 10 seconds.
Actual
Meas. Value
Reference value
display of the
actual meas. value
Select new
reference value
Display selected
meas. value
Approx. 10 sec
48
parameter (see chapter 5.3).
+
or
-
+
or
-
+
or
-